Promalight

promalight

The PROMALIGHT range of products are microporous insulation boards with very good thermal and mechanical properties. The formulation is an opacifi ed blend of fi lament reinforced pyrogenic silica (alumina for 1200 grade). PROMALIGHT 1000X is a lightweight insulation board with silicon carbide as opacifi er. PROMALIGHT 1000R has a similar thermal performance as PROMALIGHT 1000X but contains no silicon carbide (often required in glass industry). PROMALIGHT 1200 is an alumina based insulation board product at higher density and is capable of withstanding peak temperatures of 1200 °C. The PROMALIGHT® range of products is available in various coverings (PE foil & Aluminium). As an option, a reinforcement mica layer can be applied on both sides. This M-series increases the compressive strength by around 30% and improves handling.

advantages

  • extremely low thermal conductivity
  • high thermal stability
  • available in various temperature grades
  • non-combustible
  • easy to handle
  • excellent machinability
  • no harmful respirable fibres
  • environmentally friendly, free of organic binders
  • resistant to most chemicals
promalight

application area

Microporous insulation offers an extremely low thermal conductivity, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified.

HEAVY INDUSTRY
  • back-up insulation in industrial furnaces
  • aluminium industry (launders, holding and smelter furnace, …)
  • glass and ceramics industry
OIL AND GAS
  • petrochemical industry (cracking furnace, hydrogen reformer, …)
ENERGY
  • fuel cells (SOFC)

Properties

Technical data

Grade

 

-1000X

-1000R

-1200

Standard finishing

 

Naked – PE foil – ALU (2 or 6 sides)*

Additional protection option

 

Mica

Classification temperature

ºC

1000

1000

1200

Nominal density

kg/m3

280

320

450

Compressive strength (ASTM C165)

MPa = N/mm2 MPa = N/mm2

0.32

0.44 (with mica)

0.32

0.44 (with mica)

0.54

0.74 (with mica)

Thermal conductivity (ISO 8302, ASTM C177)

 

 

 

 

200 ºC

W/m K

0.023

0.022

0.029

400 ºC

W/m K

0.026

0.024

0.033

600 ºC

W/m K

0.030

0.029

0.039

800 ºC

W/m K

0.036

0.034

0.044

Specific heat capacity

 

 

 

 

200 ºC

kJ/kg K

0.86

0.92

0.89

400 ºC

kJ/kg K

0.96

1.00

0.99

600 ºC

kJ/kg K

1.03

1.04

1.04

800 ºC

kJ/kg K

1.07

1.08

1.07

Shrinkage

 

 

 

 

1-sided 12h – 1000 °C

%

< 0.5

< 0.5

< 0.05

Full soak 24h –1000 °C

%

< 3

< 3

< 0.1

Full soak 24h –1150 °C

%

< 3

Furmats for over 3 decades, has been serving the Steel Industry by host of products including supply of best quality Ferro Alloys. Our operations HO in New Delhi, covers several markets with our team putting constant endeavors to reach the clients for their Ferro Alloys needs in numerous industrial clusters including Ghaziabad, Kanpur, Sahibabad, Meerut (UP or Uttar Pradesh), Mandigobindgarh, Ludhiana, Jalandhar (Punjab), Baddhi, Kaleamb (HP or Himachal Pradesh), Ahmedabad, Rajkot, Surat, Baroda (Gujarat), Gwalior, Indore (MP or Madhya Pradesh), Raipur, Raigarh (Chattisgarh), Sonipat, Hissar, Faridabad (Haryana), J&K, Assam, Meghalya, Bhiwadi, Jaipur, Kota, Ajmer (Rajasthan), Kolkata, Durgapur, Asansol (West Bengal), Jharsuguda, Angul, Cuttack, Jajpur, Rourkela (Odisha), Vizag (Andhra Pradesh), Coimbatore, Chennai (Tamil Nadu), Mumbai, Pune, Nagpur (Maharashtra), Haridwar, Kashipur (Uttrakhand)…..

Likewise our team is forwarding timely offers for Exports for requirements in other part of the world including Africa (Nigeria), Europe, Bangladesh, Nepal, Bhutan..