microtherm mps

microtherm mps

MICROTHERM MPS (MOULDED PIPE SECTIONS) are preformed microporous insulation shells with very good thermal properties. The shells are covered in a glass cloth outer envelope, making them clean and easy to handle. The formulation is an opacified blend of filament reinforced pyrogenic silica.
MICROTHERM MPS shells have a standard thickness of 25 mm and are designed to fit on standardized pipes. Standard elbows are available for 45° and 90°.

advantages

  • Extremely low thermal conductivity
  • High thermal stability
  • Non–combustible
  • Standardized dimensions
  • Quick, clean and easy to install
  • Simple to cut and shape
  • No harmful respirable fibres
  • Environmentally friendly, free of organic binders
  • Resistant to most chemicals

Application areas

Microporous insulation offers an extremely low thermal conductivity, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified.

OIL AND GAS INDUSTRY
• Petrochemical industry
• Piping insulation
ENERGY
• CSP (Concentrated Solar Power)
• Fuel Cells
• Piping insulation in power plants

properties

Technical data                                               

Finishing

 

Glass cloth (E-glass)

Classification temperature

ºC

1000

Nominal density

kg/m3

320

Compressive strength (ASTM C165)

MPa = N/mm2

0.32

Thermal conductivity (ISO 8302, ASTM C177)

 

 

200 ºC

W/m K

0.022

400 ºC

W/m K

0.024

600 ºC

W/m K

0.029

800 ºC

W/m K

0.034

Specific heat capacity

 

 

200 ºC

kJ/kg K

0.92

400 ºC

kJ/kg K

1.00

600 ºC

kJ/kg K

1.04

800 ºC

kJ/kg K

1.08

Shrinkage

 

 

1-sided 12h – 1000 °C

%

< 0.5

Full-soak 24h – 1000 °C

%

< 3

Furmats for over 3 decades, has been serving the Steel Industry by host of products including supply of best quality Ferro Alloys. Our operations HO in New Delhi, covers several markets with our team putting constant endeavors to reach the clients for their Ferro Alloys needs in numerous industrial clusters including Ghaziabad, Kanpur, Sahibabad, Meerut (UP or Uttar Pradesh), Mandigobindgarh, Ludhiana, Jalandhar (Punjab), Baddhi, Kaleamb (HP or Himachal Pradesh), Ahmedabad, Rajkot, Surat, Baroda (Gujarat), Gwalior, Indore (MP or Madhya Pradesh), Raipur, Raigarh (Chattisgarh), Sonipat, Hissar, Faridabad (Haryana), J&K, Assam, Meghalya, Bhiwadi, Jaipur, Kota, Ajmer (Rajasthan), Kolkata, Durgapur, Asansol (West Bengal), Jharsuguda, Angul, Cuttack, Jajpur, Rourkela (Odisha), Vizag (Andhra Pradesh), Coimbatore, Chennai (Tamil Nadu), Mumbai, Pune, Nagpur (Maharashtra), Haridwar, Kashipur (Uttrakhand)…..

Likewise our team is forwarding timely offers for Exports for requirements in other part of the world including Africa (Nigeria), Europe, Bangladesh, Nepal, Bhutan..